Somfy ST30 Motor DCT and RS-485 Limit Setting Tool

Somfy ST30 Motor DCT and RS-485 Limit Setting Tool #9014599

• Used for setting the shade limits on the Somfy Sonesse ST30 DCT and RS-485 SDN Network Legacy Motors Version G and below and the Glydea Ultra DCT Drapery Motor. Use < Somfy #9017142 > Digital Limit Setting Tool for ST30 Motor Versions H and higher.
• Use #9050280 for ILT-50 Motor limit setting
• Somfy Part #9014599

  Note: A 4-wire limit setting cable (# 9014793) is needed to set limits for both the ST-30 DCT and ST-30 RS-485 Motors. This cable is supplied with the ST-30 DCT Motor but is not supplied with the ST-30 RS-485 motor.  See “Additional Options” below to order. The 9015443 is an 8Ft  4-wire limit setting cable with an RJ12 end that plugs into the Glydea DCT Motor as chosen with the drop down box below.